» Back to Home Broadband Support
Double click the "My Computer"
icon on your desktop or from your "Start" menu.
Within the My Computer window, double click your CD-ROM drive and
locate the Setup.exe file.
Double click the "Setup.exe" icon.
Welcome to the D-Link DSL-200 ADSL Modem Setup.
Click the "Next>" button.
Select your ISP.
Choose "Other Service Provider".
Click the "Next>" button.
Select driver type.
Choose "WAN Driver".
Click the "Next>" button.
Enter your communication settings.
VPI=8, VCI=35
Encapsulation = RFC 2364 PPPoATM LLC Encapsulation
Modulation = G.DMT
Setup has enough information to start copying the driver files.
Click the "Next>" button.
You will be prompted with several windows stating that the software
has not passed Windows Logo testing.
Click the "Continue Anyway" button on all occurrences.
The DSL Installer has finished copying the files to your computer.
Click the "Finish" button.
Please plug the DSL-200 modem into your computer.
You will now be prompted to install software for the following:
1. D-Link DSL200 USB ADSL Loader
2. D-Link DSL200 USB ADSL Modem(WAN)
Welcome to the Found New Hardware Wizard.
This wizard will install the software for the D-Link DSL200 USB
ADSL Loader.
Choose "Install the software automatically (Recommended).
Click the "Next>" button.
Please wait while the wizard installs the softwareÖ
You will be prompted that the software has not passed Windows Logo
testing.
Click the "Continue Anyway" button.
You have successfully installed the software for the D-link DSL-200
USB ADSL Loader.
Click the "Finish" button.
Welcome to the Found New Hardware Wizard.
This wizard will install the software for the D-Link DSL200 USB
ADSL Modem(WAN).
Choose "Install the software automatically (Recommended).
Click the "Next>" button.
Please wait while the wizard installs the softwareÖ
You will be prompted that the software has not passed Windows Logo
testing.
Click the "Continue Anyway" button.
You have successfully installed the software for the D-link DSL-200
USB ADSL Modem(WAN).
Click the "Finish" button.
Congratulations, you have successfully installed all components
of the D-Link DSL-200 USB ADSL Modem.
After installing the necessary software, an icon will be placed
on your desktop labelled "D-Link Dial-Up PPP Connection" as well
as training arrows on your system tray (bottom right).
Next > Connect to Connexus
Connect to Connexus
† 
Double click the "D-Link Dial-Up PPP Connection" icon on your desktop.
Enter your username and password.
Note: your username in this instance is your complete email address.
Click the "Dial" button.
Congratulations, you have successfully connected to Connexus and enabled a PPPoE session.
Next > Set the D-Link Dial-Up PPP Connection as your default connection.
Set the D-Link Dial-Up PPP Connection as your default connection
Open up Internet Explorer.
Click on the "Tools" link at the top.
From the Tools drop down menu, click on "Internet Options".
(This will open up the Internet Options window.)
Click on the "Connections" tab.
Select the "D-Link Dial-up PPP Connection".
Click the "Set Default" button.
Select "Always dial my default connection".
Click the "Apply" button then the "OK" button
Congratulations, you have successfully completed the D-Link DSL-200 USB ADSL Modem - PPPoE Installation for Windows XP.
